Table of Contents
Advertisement
3 .
BIOS recovery (3-pin BIOS_R)
The force BIOS recovery jumper allows you to force recover the BIOS
settings when the BIOS gets corrupted or destroyed.
The jumper block is on pins 1 and 2 during normal operation (default).
To force recover the BIOS, set the jumper block on pins 2 and 3.
To recover the BIOS:
1 . Turn OFF your computer and unplug the power cord.
2 . Move the jumper cap from pins 1-2 (default) to pins 2-3.
3 . Insert a floppy disk with the original or updated BIOS file, and
rename the BIOS file name as P5GD1FM.ROM.
4 . Plug the power cord and turn ON the computer.
5 . The system searches for the BIOS file in the floppy then reflashes
the BIOS.
6 . When finished, shut down your computer.
7 . Replace the jumper cap from pins 2-3 to pins 1-2.
8 . Reboot your computer.
9 . Hold down the <Del> key during the boot process and enter BIOS
setup to re-enter data.
P5GD1-FM
P5GD1-FM BIOS recovery setting
1 - 2 0
®
BIOS_R
3
2
2
1
Normal
Recovery
(Default)
Chapter 1: Product introduction
Hide quick links:
Advertisement
Table of Contents
