BT Response 123 User Manual page 16

2254 Response 123 U/g
To check your outgoing
message
Press and release the OGM
button. Your outgoing message
will be played back to you.
To change your outgoing
message
You can change your outgoing
message at any time by
recording a new message as
described on page 15.
Receiving messages
After following the set-up
procedure your Response 123
is ready to receive messages.
Your Response 123 will answer
a call after 6 rings if you have
no messages. After your first
message is recorded your
Response 123 will answer
subsequent calls after 2 rings
(see Remote access, page 19).
16
Response 123 ~ Edition 2 ~ 20.12.99
20/12/1999 10:53 am Page 16
Callers can leave messages of
up to 2 minutes long.
Your Response 123 will
terminate a call under certain
conditions:
• If a caller pauses for more
than 6 seconds when leaving
a message.
• If the memory becomes full
during recording.
• If the incoming message
lasts longer than 2 minutes.
Message indicator
While a message is being
recorded, the red message
p
indicator light on the PLAY
PLAY
button remains lit.
When a message has been
recorded, the red light flashes.