BT Response 123 User Manual page 10

2254 Response 123 U/g
3 Plug the adaptor into a
mains power socket
The message indicator will light up and
your Response 123 will beep. This is a
prompt for you to record your outgoing
message. (See page 15.)
4 Set the ringer switch
The ringer switch is on the back of the
base. There are two settings.
Ringer
On
ON - ring.
OFF - no ring.
10
Response 123 ~ Edition 2 ~ 20.12.99
20/12/1999 10:53 am
Ringer
Off
Page 10
5 Insert the back-up battery
The back-up battery (9v 6LR61 not
supplied) ensures that all settings and
messages are saved for up to 6 hours
in the event of a power cut.
If the back-up battery runs out, or no
battery is fitted, then in the event of a
power failure your Response 123 will
revert to its original settings. Your
messages and outgoing message will
be lost.
Remove the screw before opening the
compartment.
9V BATTERY
OPEN
6 Now you can plug your
Response 123 into a
telephone socket
Your Response 123 is now ready
for use.