SoundCraft EFX12 User Manual page 21

Hide thumbs Also See for EFX12:
Table of Contents

Advertisement

7 2 TRACK IN
These two RCA phono sockets are unbalanced Left and Right line-level inputs, used for connecting a play-
back device.
8 2 TRACK TO MIX
Press this switch to route the 2 Track in signals, connected to the Left and Right RCA sockets 7, to the MIX
Left/Right signal at the MIX outputs.
9 MONITOR 2 TRACK
Press this switch to route the 2 Track signal to the monitor and phones, over-riding the default Monitor/
Phones signal.
10 MONITOR LEVEL
This control sets the level to the MONITOR LEFT & RIGHT outputs. If headphones are plugged into the
PHONES jack, the headphone level will track the Monitor Level.
11 MONITOR OUTPUTS
The Monitor Outputs are on 3-pole 'A' gauge jacks and are balanced connections
12 PHONES LEVEL
This control sets the output level to the Headphone outputs. If headphones are plugged into the PHONES
jack, then the knob sets a comfortable headphone listening level without affecting the Monitor output levels.
13 HEADPHONES JACK
The PHONES output is a 3-pole ' A ' gauge jack, wired as a stereo output as shown, ideally for headphones of
150Ω or greater. 8Ω headphones are not recommended.
14 AUX 1 OUTPUT
This output is on a 3-pole 'A' gauge jack and is a balanced output.
15 AUX 1 PRE/POST SWITCH
This switch globally switches the AUX 1 sends, on all of the input modules, to be either pre-fade or post-fade.
16 FX BUS OUTPUT
This output carries the signal from the FX bus. It could be used as a second Aux Output if desired, if the FX
Processor is not needed at the time. The FX sends on the inputs channels to the FX bus are always post-fade.
17 FOOTSWITCH
This is used by the FX Processor, see page 23.
18 STEREO RETURN INPUTS
This pair of inputs accept 3-pole 'A' gauge (TRS) jacks. Use these inputs for sources such as keyboards, drum
machines, synths or CDs. The inputs are BALANCED. Mono sources may be used by plugging into the left jack
only.
19 STEREO RETURN LEVEL
This control sets the level of signal routed to the main mix busses. There is an associated PK LED to warn of
signals which are too high.
21

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Efx8

Table of Contents