Declaration Of Conformity; Important Note On Power Cable - Fujitsu 38B2-M Owner's Manual

Table of Contents

Advertisement

Colour monitor 38B2-M

Declaration of Conformity

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
Product name:
Trade name:
Model number(s):
Name of responsible party:
Contact person:
Phone No.:
Fax No.:
We, Fujitsu Siemens Computers, Inc., hereby declare that the equipment bearing the trade name
and model number specified above was tested conforming to the applicable FCC rules under the
most accurate measurement standards possible, and that all the necessary steps have been taken
and are in force to assure that production units of the same equipment will continue to comply with
the Commissions requirements.

Important note on power cable

To guarantee safe operation, use the cable supplied. Use the following guidelines if it is necessary
to replace the original cable set.
The female/male receptacles of the cord set must meet CEE-22 requirements.
The cable has to be HAR-certified or VDE-certified. The mark HAR or VDE will appear on the
outer sheath or on the insulation of one of the inner conductors.
For devices which are mounted on a desk or table, type SVT or SJT cable sets may be used.
For devices which sit on the floor, only SJT type cable sets may be used.
The cable set must be selected according to the current rating for your device.
4 - English
Colour LCD Monitor
Fujitsu Siemens Computers Inc.
38B2-M
Fujitsu Siemens Computers, Inc.
598 Gibraltar Drive
Milpitas, CA 95035 - 6315
U.S.A.
Bernd Schroettle-Henning
(408) 571-6051
(408) 571-6196
A26361-K853-Z200-1-5E19

Advertisement

Table of Contents
loading

Table of Contents