Fujitsu 38B2-M Owner's Manual page 13

Monitor settings with the buttons of the control panel
With the buttons of the control panel, you can make the following settings directly: auto-adjustment
of the monitor, adjusting the brightness and adjusting the contrast.
Other settings are carried out via an integrated OSD menu (On-Screen display). For
i
additional information on this subject, refer to the "Monitor settings using the OSD menu"
section.
AUTO
Auto-adjustment of the monitor
Ê Press the AUTO button.
Clock, focus and position are set to optimum values for your system.
Adjusting the brightness
Ê
Press the 3 button to activate the setting window for brightness (Brightness).
Ê
Set the brightness with the 3 or 4 buttons, until the picture appears correct.
Ê
Press the MENU button to save the settings and to switch the OSD menu off.
If you make no changes for 10 seconds, the settings will automatically be saved and the OSD menu
will be deactivated.
Adjusting the contrast
Ê
Press the 4 button to activate the setting window for contrast (Contrast).
Ê
Set the contrast with the 3 or 4 buttons, until the picture appears correct.
Ê
Press the MENU button to save the settings and to switch the OSD menu off.
If you make no changes for 10 seconds, the settings will automatically be saved and the OSD menu
will be deactivated.
A26361-K853-Z200-1-5E19
Colour monitor 38B2-M
MENU
English - 11