Preset Operating Modes - Fujitsu 38B2-M Owner's Manual

Preset operating modes

The display position and scanning have been set to optimum values at the factory for the
i
operating modes listed above. Depending on the screen controller used, it may be
necessary to adjust the display position and scanning. In this case, you can change and
save the settings (see "Operation of the monitor").
Screen resolution
720 x 400
640 x 480
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
800 x 600
832 x 624
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
For ergonomical reasons a resolution of 1024x768 is recommended. Because of the technology
used (active matrix) an LCD monitor provides a totally flicker-free picture even with a refresh rate of
60 Hz.
From a technical point of view, it is preferable to set a refresh rate of above 60°Hz on an
i
LCD monitor with a TFT display.
A26361-K853-Z200-1-5E19
Refresh rate
70 Hz
60 Hz
67 Hz
72 Hz
75 Hz
56 Hz
60 Hz
72 Hz
75 Hz
75 Hz
60 Hz
70 Hz
72 Hz
75 Hz
75 Hz
Colour monitor 38B2-M
Horizontal frequency
31.47 kHz
31.47 kHz
35.00 kHz
37.86 kHz
37.50 kHz
35.16 kHz
37.88 kHz
48.08 kHz
46.87 kHz
49.73 kHz
48,36 kHz
56.48 kHz
57.52 kHz
60.02 kHz
60.24 kHz
English - 17