Connecting Usb Devices; How To Remove Usb Devices Correctly - Fujitsu STYLISTIC Q584 Operating Manual

Connecting USB devices

USBports
With the USB ports you can connect external devices that also have a USB port
(e.g. a DVD drive, a printer, a scanner or a modem).
USB devices are hot-swappable. This means you can connect and disconnect the
cables of USB devices while the operating system is running.
USB 1.x has a maximum data transfer rate of 12 Mbps.
USB 2.0 has a data transfer rate of up to 480 Mbps.
USB 3.0 has a data transfer rate of up to 5 Gbps.
Additional information can be found in the documentation for the USB devices.
► Connect the data cable to the external device.
► Connect the data cable to a USB port (Tablet PC or docking cradle) or
micro USB port (only on Tablet PC).
Device drivers
USB devices will be automatically recognized and installed by your operating system.
For optional micro USB accessories (cables), see chapter

How to remove USB devices correctly

Always correctly remove the device according to the rules described below,
to ensure that none of your data is lost.
► Tap the symbol for safe removal of the hardware.
► Select the device you wish to shut down and remove.
► Tap OK.
Wait for the dialog box which tells you that it is now safe to remove the device.
Fujitsu
Connecting external devices
+
"Micro USB adapters", Page 54.
65