Cisco Nexus 5548P Datasheet page 6

The Cisco Nexus 2248TP-E Fabric Extender is a general-purpose 1 Gigabit Ethernet fabric extender with
enhancements that target workloads such as large-volume databases, distributed storage, and video editing. Just
like the Cisco Nexus 2248TP, the Cisco Nexus 2248TP-E also supports 48 100/1000BASE-T host facing ports and
four 10 Gigabit Ethernet fabric interfaces.
The Cisco Nexus 2232TM-E Fabric Extender supports scalable 1/10GBASE-T environments, ease of migration
from 1GBASE-T to 10GBASE-T, and effective reuse of existing structured cabling. It comes with an uplink module
that supports eight 10 Gigabit Ethernet fabric interfaces. It is a superset of the Cisco Nexus 2232TM with the latest
generation of 10GBASE-T PHY, enabling lower power and improved bit error rate (BER). The Cisco Nexus
2232TM-E supports DCB and LAN and SAN consolidation.
The Cisco Nexus 2232PP 1/10GE Fabric Extender is the ideal platform for migration from Gigabit Ethernet to
10 Gigabit Ethernet and unified fabric environments. It supports FCoE and a set of network technologies known
collectively as Data Center Bridging (DCB) that increase the reliability, efficiency, and scalability of Ethernet
networks. These features allow the switches to support multiple traffic classes over a lossless Ethernet fabric, thus
enabling consolidation of LAN, SAN, and cluster environments.
The Cisco Nexus 2248PQ 10 Gigabit Ethernet Fabric Extender is the newest member of the Cisco Nexus Fabric
Extender Family. It supports high- density 10 Gigabit Ethernet environments and has 48 forty-eight 1/10 Gigabit
Ethernet SFP+ host ports and 4 QSFP+ fabric ports (16 x 10 GE fabric ports). QSFP+ connectivity simplifies
cabling while lowering power and solution cost. The Cisco Nexus 2248PQ 10GE Fabric Extender supports FCoE
and a set of network technologies known collectively as Data Center Bridging (DCB) that increase the reliability,
efficiency, and scalability of Ethernet networks. These features allow support for multiple traffic classes over a
lossless Ethernet fabric, thus enabling consolidation of LAN, storage area network (SAN), and cluster
environments.
The Cisco Nexus B22HP Fabric Extender (Figure 10) for HP Blade System is the first 10 Gigabit Ethernet and
FCoE fabric extender in a third-party blade chassis format. It is targeted at customers who already own HP blade
servers and makes it easier for them to integrate with the Cisco Nexus data center fabric.
Figure 10.
The Cisco Nexus B22F (Figure 10) Fabric Extender for Fujitsu BladeSystem is the 10 Gigabit Ethernet and FCoE
fabric extender in a third-party blade chassis format. It is targeted at customers who already own Fujitsu blade
servers and makes it easier for them to integrate with the Cisco Nexus data center fabric.
The Cisco Nexus B22DELL (Figure 10) Fabric Extender for Dell Blade System is the 10 Gigabit Ethernet and
FCoE fabric extender in a third-party blade chassis format. It is targeted at customers who already own Dell blade
servers and makes it easier for them to integrate with the Cisco Nexus data center fabric.
Cisco Nexus 2000 Series Fabric Extenders connect to a parent Cisco Nexus switch through their fabric links using
CX1 copper cable, short-reach or long-reach optics, and the cost-effective Cisco Fabric Extender Transceivers.
Cisco Fabric Extender Transceivers are optical transceivers that provide a highly cost-effective solution for
connecting the fabric extender to its parent switch.
© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
From Left to Right: Cisco Nexus B22HP Fabric Extender, Cisco Nexus B22F Fabric Extender, Cisco Nexus
B22DELL Fabric Extender
Page 6 of 29