Table of Contents
Advertisement
Chapter 4 Special Features and Utilities
Chapter 4 Special Features and Utilities
RAID (Redundant Array of Independent Disks)
This motherboard supports RAID 0, RAID 1 and RAID 0+1 functions. For more
RAID introduction, please visit our website:
http://english.aopen.com.tw/tech/techinside/RAID.htm
RAID Configuration Utility
Nvidia nForce4 chipset support RAID 0, 1 and 1+0 functions. In order to make
sure your system can recognize and operate Serial ATA RAID device smoothly, we
have to enter RAID Configuration Utility to do some settings. After finishing the
BIOS setup and reboot, you will see [Press F10 to enter RAID setup utility] about
half way through the boot up. Pressing F10 immediately, you will later be
presented with a screen as shown below, You can use this utility to create or
delete your disk arrays.
NVIDIA RAID IDE ROM BIOS 4.34
Copyright (c) 2003 NVIDIA Corp.
Detecting array...
Press F10 to enter RAID setup utility
Note:
For operating RAID 0 or RAID 1 smoothly, user has to install both
NVIDIA RAID CLASS DRIVER and NVIDIA NForce Storage Controller.
34
Advertisement
Table of Contents
