Operating Sequence - Electrolux EW 859 F Instruction Book

Operating sequence

Before washing your first load of laundry, we
recommend that you run a cotton cycle at 60°C, with
the machine empty, in order to remove any
manufacturing residue from the drum and tub.
Pour half a measure of detergent into the main wash
compartment and start up the machine.
1. Place the laundry in the drum
Open the door.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible.
Close the door.
2. Measure out the detergent
Pull out the dispenser drawer until it stops.
Measure out the amount of detergent recommended
by the manufacturer in a graduated cup and pour it
into the main wash compartment
carry out a prewash, pour detergent into the
appropriate compartment marked
3. Measure out the additives
If required, pour fabric softener into the compartment
marked without exceeding the «MAX» mark.
4. Select the desired option(s)
Depress SPIN SPEED REDUCTION
HALF LOAD
desired.
5. Select the temperature
Turn the selector dial to the required temperature
setting.
6. Select the programme and start it
. If you wish to
Turn the programme selector dial clockwise to the
required wash programme and depress the ON/OFF
.
button
machine starts to operate.
7. At the end of the programme
The machine stops automatically, the operating pilot
light goes out.
If you have selected a programme which stops with
water of the last rinse in the drum (anti-crease
button depressed), drain the water before opening
the door.
13
or ANTI-CREASE
: the operating pilot light comes on and the
and/or
button, if