Table of Contents
Advertisement
Protect the environment
Hand over the cabinet packaging and discarded
·
fridges and freezers to a recycling station.
Contact your local city office or your closest
dealer for more information.
When cleaning the cabinet, use a mild
·
washing-up detergent.
Maintenance and Cleaning
Removing the ventilation grille
The ventilation grille can be removed, e.g. to wash
the grille.
Make sure the door is open when removing the
ventilation grille. Unsnap the upper edge of the grille
by pulling outward/downward. Then pull the grille
straight out to completely remove it.
Cleaning
Clean the cabinet at regular intervals.
Don't use detergents, abrasive powders,
high perfumed cleaning products, wax
polishes or cleaning products
containing bleach or alcohol when
cleaning the product
Disconnect the appliance from electricity supply.
Clean out the drip channel inside the wine cooler at
regular intervals and ensure that the drip channel is
clear at all times. If blocked carefully clear using a
piece of flexible curtain wire inserted into the drain
outlet to remove the blockage.
Clean the inside and accessories with warm water
and bicarbonate of soda (5ml to 0,5 litre water)
Rinse and dry thoroughly.
Regularly check the door seals and wipe clean to
ensure they are clean and free from debris.
Drawer.
Pull out drawer.
Lift it over the locks in back on the sliding guides.
Tip drawer downwards and pull it out.
Clean.
Assemble in reverse order.
Clean off the interior wooden details with a moist
rag and mild kitchen soap. Do not soak the wood.
Wash the outer cabinet with warm soapy water.
Remove the ventilation grille (see the section
"Removing the ventilation grille") and vacuum-clean
under the cabinet. Once or twice a year dust the
condenser (black grille) and the compressor at the
back of the appliance, with a brush or vacuum
cleaner, as an accumulation of dust will affect the
performance of the appliance and cause excessive
electricity consumption.
Defrosting the wine cooler
The wine cooler is defrosted automatically every time the compressor stops. Frost formation can be prevented
by:
· not putting warm foodstuff inside the cabinet.
· avoiding frequently opening the door or keeping it open too long.
Follow the advice in the section "Saving energy"
·
The door gasket and coolant used in this
·
cabinet will not harm the ozone layer.
All parts in the packaging can be recycled.
·
The cabinet has been designed for easy
·
dismantling and subsequent recycling.
When moving the cabinet, lift it by
the front edge to avoid scratching the
floor.
6
GB
Electrolux 818 37 80-01/7
Advertisement
Table of Contents
