Table of Contents
Advertisement
2
BASIC OPERATION
■ Power Off Emergency function
When the transceiver has a key assigned to Power OFF
Emergency, you can use the function.
This function makes the transceiver transmit emergency calls,
even though it appears to be powered OFF.
To activate the Power OFF Emergency function, turn the
power OFF while holding down [Power OFF Emergency].
When the function is activated, any key operation, the ON/OFF
Hook and Lone Worker functions become invalid. The beep,
LED indicator, display and speaker are turned OFF as well.
On the other hand, the transceiver can transmit emergency
calls according to the pre-programmed emergency settings.
Depending on the pre-programmed settings, the Ambience
Listening function can also be used. (dPMR operation only)
To cancel the Power OFF Emergency function and restore
the transceiver, turn the power ON.
15
■ Priority A channel selection
When one of the following operations is performed, the
transceiver automatically selects the Priority A channel.
• Turning the power ON
The Priority A channel is selected each time the trans-
ceiver power is turned ON.
• Auto Reset
The Priority A channel is selected when the Auto Reset
timer ends.
• OFF hook
The Priority A channel is selected when you take the mi-
crophone OFF hook.
■ Automatic Key Lock function
When the transceiver has a key assigned to Lock, the Auto-
matic Key Lock function can be used.
When no operation occurs during the pre-programmed time
period, the function automatically activates the Key Lock
function.
When the Key Lock function is ON, hold down [Lock] until
"LOCK OFF" is displayed to turn it OFF.
Advertisement
Table of Contents
