JBL OnBeat Xtreme Owner's Manual

JBL OnBeat Xtreme Owner's Manual

Bluetooth speaker dock for ipod/iphone/ipad

Advertisement

JBl
OnBeat XtreMe
®
speaker dock for iPod/iPhone/iPad
Bluetooth
®
Owner's Manual

Advertisement

Table of Contents
loading

Summary of Contents for JBL OnBeat Xtreme

  • Page 1 OnBeat XtreMe ® ™ speaker dock for iPod/iPhone/iPad Bluetooth ® Owner’s Manual...
  • Page 2: Attach Ipod/Iphone/Ipad Adapter Clip

    The JBL OnBeat Xtreme unit’s rotating dock connector lets you orient your Attach the appropriate adapter clip to the JBL OnBeat Xtreme unit as iPod, iPhone, or iPad device with its screen in portrait or landscape shown below.
  • Page 3: Connect An Auxiliary Device

    CoNNeCt aN auxiliary deviCe CoNNeCt to itunes If you are going to use your JBL OnBeat Xtreme system with another Connect the supplied USB cable to the JBL OnBeat Xtreme USB port audio source, plug one end of a 3.5mm (1/8") stereo cable (not supplied)
  • Page 4: Controls

    The Power Button LED will glow white. • When the JBL OnBeat Xtreme is on, press the Power button for less than two seconds to place the system in the Sleep mode. The Power Button LED will glow amber.
  • Page 5: Remote Control Functions

    CoNtrol FuNCtioNs remote Control action Function You can use the JBL OnBeat Xtreme remote control to power on and off button the JBL OnBeat Xtreme unit, change the volume, select music from your Volume Short press • If the audio is not muted, each press lowers the docked device, change the audio source and change the EQ settings.
  • Page 6: Bluetooth Pairing And Listening

    Note: Bluetooth pairing between two devices does not have to be repeated after a successful initial pairing unless the JBL OnBeat 1. Make sure your JBL OnBeat Xtreme system is turned on (the Power Xtreme system has been removed from the Bluetooth-enabled device’s LED glows white).
  • Page 7 Call From a Bluetooth-eNabled deviCe The JBL OnBeat Xtreme system’s built-in microphone lets you use it as a speakerphone. 1. Make sure the JBL OnBeat Xtreme system is paired (see Bluetooth Pairing, on page 6). 2. When you hear your Bluetooth-enabled device’s ringtone from the JBL OnBeat Xtreme system, press the Bluetooth button to answer the phone call.
  • Page 8: Rotating The Dock

    Xtreme system, its video output will automatically be set to off, even if it and extend the base of the dock, then follow steps 1 and 2 above. was turned on before you docked the device. To turn the JBL OnBeat Xtreme system video output on, press the Up Dock Base Extend button on the remote control for at least two seconds.
  • Page 9 The Source Select LED color changes to indicate and provide information about the active source. The JBL OnBeat Xtreme dock has five equalizer (EQ) modes that adjust the tone quality to suit different types of programs: Music (default), source select led state Movies, Chat, Internet Radio or Game, in that order.
  • Page 10: Upgrading Firmware

    PC via USB, it will charge while docked on the JBL OnBeat Xtreme speaker dock. If the iPad device does not charge when it is connected directly to the PC via USB, it will not charge while docked on the JBL OnBeat Xtreme speaker dock.
  • Page 11 Note No sound (Power button LED is not Faulty AC connection Make sure that the JBL OnBeat Xtreme The Power button LED glows white when illuminated) system is connected to a working AC the power is on.
  • Page 12: Specifications

    The Power button glows white when the powered on. JBL OnBeat Xtreme system. unit is on. The JBL OnBeat Xtreme source is not in Press the Source Select button until it The Source Select button flashes blue Bluetooth pairing mode.
  • Page 13 8500 Balboa Boulevard, Northridge, CA 91329 USA © 2011 HARMAN International Industries, Incorporated. All rights reserved. JBL is a trademark of HARMAN International Industries, Incorporated, registered in the United States and/or other countries. Atlas and OnBeat Xtreme are trademarks of HARMAN International Industries, Incorporated.

Table of Contents