Hinge Cover - Dell Vostro 1000 PP23LB Owner's Manual

Hinge Cover

CAUTION:
safety instructions in the Product Information Guide.
NOTICE:
grounding strap or by periodically touching an unpainted metal surface (such as a
connector on the back of the computer).
NOTICE:
battery from the battery bay before you begin working inside the computer.
1 Follow the procedures in "Before You Begin" on page 111.
2 Remove the hinge cover.:
Open the display all the way (180 degrees) so that it lies flat against
a
your work surface.
NOTICE:
simultaneously.
Insert a scribe into the indent to lift the hinge cover on the right side.
b
Ease the hinge cover up, moving from right to left, and remove it.
c
NOTE:
When replacing the hinge cover, first insert the left edge and then press
from left to right until the cover snaps into place.
122
Adding and Replacing Parts
Before you begin any of the procedures in this section, follow the
To avoid electrostatic discharge, ground yourself by using a wrist
To help prevent damage to the system board, you must remove the
To avoid damage to the hinge cover, do not lift the cover on both sides