Returning A Hard Drive To Dell - Dell VOSTRO 1000 PP23LB Owner's Manual

NOTICE:
When the hard drive is not in the computer, store it in protective antistatic
packaging. See "Protecting Against Electrostatic Discharge" in the Product
Information Guide.
3 Slide the hard drive out of the computer.
4 Remove the new drive from its packaging.
Save the original packaging for storing or shipping the hard drive.
NOTICE:
Use firm and even pressure to slide the drive into place. If you use
excessive force, you may damage the connector.
5 Slide the hard drive into the bay until it is fully seated.
6 Replace and tighten the hard drive screws.
7 Install the operating system for your computer. See "Restoring Your
Microsoft® Windows Vista® Operating System" on page 148.
8 Install the drivers and utilities for your computer. See "Reinstalling Drivers
and Utilities" on page 144.

Returning a Hard Drive to Dell

Return your old hard drive to Dell in its original or comparable foam
packaging. Otherwise, the hard drive may be damaged in transit.
1 foam packaging
94
Adding and Replacing Parts
1
2
2
hard drive