Icom IC-M421 Instruction Manual page 41

t After setting the longitude data, push [ENT] to set the time
information appears. Set the current UTC time with [L] or
[M], then push [ENT].
• Push [CH•DUAL] or [16•C] to move the cursor forward or back-
ward, respectively.
• Push [SCAN•TAG] to clear the UTC time data.
• Push [CLR] to cancel and exit the condition to the DSC menu.
Push
y Push [ENT] to transmit the position reply call to the se-
lected station.
• Your position data is transmitted, when [ENT] is pushed.
D D Transmitting a position report reply call
Transmit a position report reply call when a position report call
is received.
q Push [MENU] to enter the DSC menu.
w Push [L] or [M] to select "
push [ENT].
• " " item appears after a position report
call is received.
e Push [L] or [M] to select the desired individual address or
ID code, push [ENT].
Push
r Push [ENT] to transmit the position report reply call to the
selected station.
6
DSC OPERATION
," and
6
35