Table of Contents
Advertisement
I Optional HM-75A
The optional HM-75A allows you to remotely select operating
frequencies, memory channels, etc.
Remote control functions can be selected from 3 settings.
These can be selected with "MIC SIMPLE MODE" in set
mode.
(p. 89)
➪
MENU screen
SET MODE
(Push [MENU/LOCK]) (Rotate [DIAL]
Transmit LED
A
PTT switch
B
OFF
ON
LOCK
The HM-75A has a lock switch on the backside to prevent ac-
cidental frequency changes, etc.
Be sure to turn power OFF when plugging the HM-75A to
the [MIC/SP] jacks.
[DIAL] ↔ [∫ ∫ ](2)/[√ √ ](8)
†
REMOTE CONTROL MICROPHONE
➪
MIC SIMPLE MODE
†
†
, then push [ï](5)
.)
Microphone
Speaker
Earphone jack
[ï](5) ↔ [≈ ≈ ](6)
• NORM-1: (default)
[A]
Selects band.
[B]
Toggles VFO mode and memory mode.
[Y]
Frequency or memory channel "UP".
[Z]
Frequency or memory channel "DOWN".
• NORM-2:
[A]
Toggles the monitor function.
[B]
Toggles VFO mode and memory mode.
[Y]
Frequency or memory channel "UP".
[Z]
Frequency or memory channel "DOWN".
• SIMPLE:
[A]
Toggles the monitor function.
[B]
Selects call channel C0.
• Selects memory channel 000 in memory mode.
[Y]
• Volume "UP" while operating the monitor function.
• Selects memory channel 001 in memory mode.
[Z]
• Volume "DOWN" while operating the monitor function.
VFO mode cannot be selected via the microphone when
SIMPLE mode is selected.
SIMPLE mode can select only 3 channels and is useful for
group operations during touring, etc.
15
OPTIONS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
123
Advertisement
Table of Contents
