Uniden DSS7855 Owner's Manual page 52

Storing Caller ID messages in the Phonebook
Messages shown in the Caller ID list can be stored in the phonebook. The phone number
If the Caller ID
and name of the party on the Caller ID list can be stored in memory.
!
message was
received as a
1) When the phone is in standby mode, select the Caller ID message to be stored. Then
private/unknown
press the
number, or the
already stored in memory, you will hear a beep and
message does not
appears. The number will not be stored.
have the number,
you cannot store
2) To complete the setting, follow the steps 4-8 in "Phonebook (Storing Phone Numbers,
the message in the
Phonebook. If it Names, Distinctive Rings, and Speed dial)"on page 38.
was received as
private/unknown
name, the
message will be
stored as <No
Name>.
Even if the 100
!
memory locations
are full, the
message will be
stored in the
Phonebook.
However, the
message will be
erased from the
Caller ID list.
STORE soft key.
Store/Edit Name
[51]
appears. If the Caller ID message is
This data is already stored!!