Configuration Menu
This page displays the
current information for
the DWL-900AP+. It
will display the WAN,
LAN and MAC
address information.
If the DWL-900AP+ is
configured to receive
a dynamic IP Address
from the router there
will be a Release
button and a Renew
button. If the Access
Point is attached to a
DSL modem with a
PPPoE account, there
will be a Connect and
Disconnect button.
The DWL-900AP+
keeps a running log of
events and activities
occurring on the
Access Point. If the
device is rebooted,
the logs are
automatically cleared.
You may save the log
files under Log
Settings.
To enable or disable
logging for the Access
Point, click on Log
Settings. To monitor
the wireless stations,
select Enable and the
log file will be sent to
the associated
computer.
Status > Device Info
Fig. 5.12
Status > Log
Fig. 5.13
First Page - displays the first page of the Log
Last Page - displays the last page of the Log
Previous - moves back one log page
Next - moves forward one log page
Clear - clears the log completely
Log Settings – Brings up the page to configure the logs