D-Link AirPlus Xtreme G+ DI-624+ Manual page 18

Using the Configuration Menu (continued)
DHCP stands for Dynamic Host Control Protocol. The DI-624+ has a built-in DHCP server.
The DHCP Server will automatically assign an IP address to the computers on the LAN/
private network. Be sure to set your computers to be DHCP clients by setting their TCP/
IP settings to "Obtain an IP Address Automatically." When you turn your computers on,
they will automatically load the proper TCP/IP settings provided by the DI-624+. The
DHCP Server will automatically allocate an unused IP address from the IP address pool
to the requesting computer. You must specify the starting and ending address of the IP
address pool.
DHCP Server-
Starting
IP Address-
Ending
IP Address-
Lease Time-
Home > DHCP
DI-754
Select Enabled or Disabled. The default setting is Enabled.
The starting IP address for the DHCP server' s IP assignment
The ending IP address for the DHCP server' s IP assignment
The length of time for the IP lease. Enter the Lease time. The
default setting is one hour
18