D-Link AirPlus Xtreme G+ DI-624+ Manual page 16

Using the Configuration Menu (continued)
Please be sure to
remove any
existing
PPPoE client
software
installed on your
computers.
Choose PPPoE (Point
to Point Protocol over
Ethernet) if your ISP
u s e s a P P P o E
connection. Your ISP
will provide you with a
u s e r n a m e a n d
password. This option
is typically used for
DSL services. Select
Dynamic PPPoE to ob-
tain an IP address au-
tomatically for your
PPPoE connection.
Select Static PPPoE
to use a static IP ad-
dress for your PPPoeE
connection.
PPPoE-
User Name-
Retype Password-
Service Name-
IP Address-
Primary DNS
Address-
Secondary DNS
Address-
Home > WAN > PPPoE
Choose this option if your ISP uses PPPoE. (Most DSL users
will select this option.)
Dynamic PPPoE- receive an IP Address automatically from your ISP.
Static PPPoE-you have an assigned (static) IP Address.
Your PPPoE username provided by your ISP.
Re-enter the PPPoE password
Enter the Service Name provided by your ISP (optional).
This option is only available for Static PPPoE. Enter the static
IP Address for the PPPoE connection.
Primary DNS IP address provided by our ISP
This option is only available for Static PPPoE. Enter the static
IP Address for the PPPoE connection.
(Continued on the next page) 16