Table of Contents
Advertisement
ENGLISH
Specifications
n
Audio section
• Power amplifier
Rated output:
Dynamic power:
Output terminals:
• Analog
Input sensitivity / Input impedance:
Frequency response:
S/N:
Distortion:
Rated output:
• Digital
D/A output:
Digital input:
• Phono equalizer (PHONO input — REC OUT)
Input sensitivity:
RIAA deviation:
S/N:
Rated output:
Distortion factor:
Front (A, B):
110 W + 110 W
(8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.)
140 W + 140 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Center:
110 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.)
140 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Surround :
110 W + 110 W
(8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.)
140 W + 140 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Surround Back:
110 W + 110 W
(8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.)
140 W + 140 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
120 W x 2ch (8 Ω/ohms)
170 W x 2ch (4 Ω/ohms)
Front:
A or B
6 ~ 16 Ω/ohms
A + B
8 ~ 16 Ω/ohms
Center, Surround, Surr. Back:
6 ~ 16 Ω/ohms
200 mV / 47 kΩ/kohms
10 Hz ~ 100 kHz +1, -3 dB (DIRECT mode)
102 dB (DIRECT mode)
0.005 % (20 Hz ~ 20 kHz) (DIRECT mode)
1.2 V
Rated output — 2 V (at 0 dB playback)
Total harmonic distortion — 0.008 % (1 kHz, at 0 dB)
S /N ratio — 102 dB
Dynamic range — 96 dB
Format — Digital audio interface
2.5 mV
±1 dB (20 Hz to 20 kHz)
74 dB (A weighting, with 5 mV input)
150 mV
0.03 % (1 kHz, 3 V)
n
Video section
• Standard video connectors
Input / output level and impedance:
1 Vp-p, 75 Ω/ohms
Frequency response:
5 Hz ~ 10 MHz — +0, –3 dB (when video convert set to "OFF")
• S-Video connectors
Y (brightness) signal — 1 Vp-p, 75 Ω/ohms
Input / output level and impedance:
C (color) signal — 0.3 (PAL) / 0.286 (NTSC) Vp-p, 75 Ω/ohms
Frequency response:
5 Hz ~ 10 MHz — +0, –3 dB (when video convert set to "OFF")
• Color component video connector
Input / output level and impedance:
Y (brightness) signal — 1 Vp-p, 75 Ω/ohms
P
/ C
B
P
/ C
R
Frequency response:
5 Hz ~ 100 MHz — +0, –3 dB (when video convert set to "OFF")
n
Tuner section
(note: µV at 75 Ω/ohms, 0 dBf = 1 x 10
Receiving Range:
87 .5 MHz ~ 108.0 MHz
Usable Sensitivity:
1.0 µV (11.2 dBf)
50 dB Quieting Sensitivity:
MONO
STEREO 23 µV (38.5 dBf)
S/N (IHF-A):
MONO
STEREO 72 dB
Total harmonic Distortion (at 1 kHz):
MONO
STEREO 0.3 %
n
General
Power supply:
AC 230 V, 50 Hz
Power consumption:
500 W
0.3 W (Standby)
Maximum external dimensions:
434 (W) x 171 (H) x 420 (D) mm
Weight:
13.1 kg
n
Main remote control unit (RC-1068)
Batteries:
LR6/AA Type (two batteries)
63 (W) x 238 (H) x 31 (D) mm
Maximum external dimensions:
Weight:
190 g (including batteries)
n
Sub remote control unit (RC-1071)
Batteries:
R03/AAA Type (two batteries)
Maximum external dimensions:
54 (W) x 115 (H) x 23 (D) mm
Weight:
80 g (including batteries)
z For purposes of improvement, specifications and design are subject to change without notice.
signal — 0.7 Vp-p, 75 Ω/ohms
B
signal — 0.7 Vp-p, 75 Ω/ohms
R
[FM]
[AM]
W)
-15
522 kHz ~ 1611 kHz
18 µV
1.6 µV (15.3 dBf)
77 dB
0.15 %
Advertisement
Table of Contents
