Belkin F5U273ea User Manual page 12

Installation
NOTE: lf the video output of the Docking Station is configured
1
in Extended Mode (see "Video Modes", below) when you
disconnect the Docking Station, any open windows on the
external monitor move to the primary notebook screen. When
2
the Docking Station is reconnected to the notebook, the video
output is again configured for Extended Mode on the external
3
monitor. However, windows that were previously on the
external monitor will stay on the primary notebook screen.
Video Modes
4
The Docking Station's video output works in three modes:
• Primary Mode
5
• Extended Mode
• Mirror Mode
6
Primary Mode
Primary Mode displays what would usually be on your
notebook on the monitor attached to the Docking Station.
This mode allows you to use a larger monitor but turns your
notebook's screen off so that you can type on your computer
without the distraction of two of the same displays. Be sure
to have a monitor attached to your Docking Station BEFORE
entering into Primary Mode, as doing so without the monitor
will disable your notebook's screen and you could lose your
display until the Docking Station is unplugged.
To set up the Docking Station to use Primary Mode, follow
these steps:
1. Double click on the "B" icon in your computer's system
tray.
10 10 10