Page 2
Home Kit for Xpress Home Kit for Xpress Home Kit for Xpress Home Kit for Xpress Home Kit for Xpress Home Kit for Xpress Home Kit for Xpress Home Kit for Xpress Home Kit for Xpress Home Kit for Xpress Home Kit for Xpress Home Kit for Xpress Home Kit for Xpress...
Page 3
Introduction Congratulations and thank you for purchasing the Home Kit for Xpress and RoadyXT from Belkin. Now you can enjoy your Delphi RoadyXT or Audiovox® Xpress in the home with the convenience and style of Belkin’s industry-leading industrial design. Please be sure to read all the instructions in this User Manual so that you can get the most from your Belkin product.
Page 4
How to Attach your XM Plug-n-Play Receiver to the Belkin Home Dock The Belkin Home-Dock unit is capable of docking either the Audiovox Xpress or the Delphi RoadyXT. Please locate the adapter that corresponds to your receiver and insert it into the Home Dock. (Fig. 1) NOTE: Once the adapter has been inserted into the Home Dock, we strongly advise against the removal and reinstallation of the receiver adapter as you may damage the Home-Dock unit.
Page 5
How to Attach the Home Antenna to the Belkin Home Dock Mount or place the Home Antenna for XM to a location with a clear view of the southern sky where direct line of sight to the XM satellites is available. (For more information on antenna setup, see “Setting up the Home Antenna for Best XM...
Page 6
Attach the red and white RCA cables to the corresponding red and white connectors on your home audio-receiver system or amplifier. Connect the 3.5mm headphone line to the “line out” port on the back of your Belkin Home Dock. �������...
Page 7
How to Attach the 5V Power Adapter to the Belkin Home Dock Attach the Home Adapter for XM to your 120V AC outlet and connect the other end of the Home Adapter to the “power in” port on the back of your Belkin Home Dock.
Page 8
How to Remove your XM Receiver from the Belkin Home Dock Carefully lift your XM receiver from the Home Dock in a gentle, upward motion. Removal of Clear Plastic Tab before Use of the Infrared Remote Control A clear plastic tab has been placed in the battery compartment of the remote control to prevent drainage of battery power during shipping.
Page 9
Setting up the Home Antenna for Best XM Reception For the best XM reception, your Home Antenna should have an unobstructed line of sight to the XM satellites in the southern sky. In major metropolitan areas, XM’s network of ground repeaters will also help signal coverage. The base of the Home Antenna is ported for mounting your antenna on any surface with fasteners.
Page 10
Belkin Corporation warrants the Belkin product for one year. What will we do to correct problems? Product Warranty. Belkin will repair or replace, at its option, any defective product free of charge (except for shipping charges for the product). What is not covered by this warranty? All above warranties are null and void if the Belkin product is not provided to Belkin Corporation for inspection upon Belkin’s request at the sole expense of the purchaser, or...
Page 11
Belkin product to Belkin Corporation for inspection shall be borne solely by the purchaser. If Belkin determines, in its sole discretion, that it is impractical to ship the damaged equipment to Belkin Corporation, Belkin may designate, in its sole discretion, an equipment repair facility to inspect and estimate the cost to repair such equipment.