S-Video & Stereo Audio Connections; Digital Audio Connections - CyberHome CH-DVD 402/S Owner's Manual

Typical Connection - Composite Video & Stereo Audio
1
Typical Connection - Connecting to a TV with Composite Video In and Stereo Audio In
If your TV has only a single Video Input jack, typically a yellow-colored plug, you will use the Composite Video output
of the DVD Player for the Video Connection. We'll also assume your TV has Red and White Stereo Audio In
connectors. You will use these for the Audio Connection.
Use the included Video Cable (Yellow) to connect the Video Out of the DVD Player to the Video In of your TV.
Connect the Stereo Audio outputs (Red-Red, White-White) of the DVD Player to the matching Inputs of your TV.
Connect the Power Cord to the DVD Player and AC Power Outlet.
Turn on the TV and DVD Player (power switch on back) and select the Video Input on your TV. On some models,
this may be called "Input 1" or "Aux In". You should now see the DVD Player's splash screen on your TV.
DVD
ANALOG OUT
R
L
AUDIO AUDIO
AUDIO AUDIO
2
Connecting to a TV with S-Video In and Stereo Audio In
If your TV has an S-Video Input, it's recommended that you use this connection. S-Video separates brightness
and color signals, resulting in higher video quality than Standard Composite Video. *You must purchase a
separate S-Video Cable for this connection (not included).
In order to activate the S-VIDEO Output, you must first connect the unit using
the COMPOSITE Video Output as described in Section 1.
Enter the SETUP Menu and change the VIDEO OUTPUT setting to S_VIDEO
(See Page 31). *For Help on using the SETUP MENU, see Page 28.
Now that the S-VIDEO Output is Active, connect the S-Video Out from the DVD
Player to the S-Video In of your TV and disconnect the COMPOSITE Cable.
If you are not using a separate receiver for audio, connect the Stereo Audio
outputs (Red - Red, White - White) of the DVD Player to the corresponding
Inputs of your TV
Select the S-Video Input on your TV. On some models, this may be called "Input
2" or "Video 2". You should now see the DVD Player's splash screen on your TV.
DVD
ANALOG OUT
AUDIO AUDIO
Y
DIGITAL OUT
Cb
VIDEO
COAXIAL
OUT
Cr
S-VIDEO
OUT
COMPONENT
VIDEO VIDEO VIDEO VIDEO
VIDEO
Y
DIGITAL OUT
Cb
VIDEO
COAXIAL
R
OUT
Cr
S-VIDEO
L
OUT
COMPONENT
AUDIO AUDIO VIDEO VIDEO VIDEO VIDEO
VIDEO
VIDEO
IN
STEREO AUDIO IN
L
(WHITE)
R
(RED)
S-VIDEO
IN
STEREO AUDIO IN
L
(WHITE)
R
(RED)
13
TV
VIDEO SETUP PAGE
TV TYPE
TV DISPLAY
SHARPNESS
BRIGHTNESS
CONTRAST
VIDEO OUTPUT YCbCr
S_VIDEO
MAIN PAGE
Enter Setup
TV