Application Example - Behringer Guitar Link UCG102 User Manual

You can connect the guitar to your com-
{1}
puter via USB connection. The blue control
LED ({6}) indicates that a connection to
the computer has been established.
{2} The VOLUME control adjusts the volume
level of the headphones output. Turn the
control fully to the left before you connect
the headphones. This helps you avoid the
damage that is caused by high volume
settings.
You can use a commercially available ¼"
{3}
jack for the -connection.
We would like to draw your attention to
+
the fact that extremely loud sound levels
may damage your hearing as well as
your headphones/loudspeakers. Turn
the VOLUME control fully clockwise be-
fore you switch on the unit. Be careful to
select a suitable volume at all times.
You can connect the UCG102 to your guitar
{4}
via the guitar input (¼" jack). Use a com-
mercial ¼" mono jack cable.
{5}
{6}
You can connect the UCG102 directly to your
computer in order to record, play along to a
playback or play directly over the modeling amps
and effects. The UCG102 lets you get started
immediately, wherever you are. Simply hook up
and start to rock.

Application example

guitar link ucg102
You can modify the guitar signal with the
LEVEL switch. At high signal levels, the
CLIP LED (above the BEHRINGER LOGO)
will light up red in which case you should
set the LEVEL switch to LOW.
The blue LED indicates the status of the
USB connection.
3. Application example
7