Garmin ZUMO 665 Owner's Manual page 9

2. Tighten the nuts to secure the base. Do
not overtighten.
Handlebar
base
U-bolt
Option B: Installing the handlebar base
to the clutch/brake clamp bracket:
WarnIng

Incorrectly installing the handlebar base to
the clutch/brake bracket can cause brake
or clutch malfunction, which can result
in damage to the vehicle and the risk of
personal injury or death. Garmin strongly
recommends having an experienced installer
with the proper knowledge of clutch/brake
systems install the unit.
zūmo 665 Owner's Manual
NOTE: Both 1/4" standard and M6 bolts are
included. Match the size of the factory bolts
on your clutch/brake clamp bracket.
1. Remove the two factory bolts on your
clutch/brake clamp bracket.
2. Thread the new bolts through the
handlebar base, spacers, and clamp
bracket.
3. Tighten the bolts to secure the base.
Handlebar
Handlebar
Clutch/brake
clamp bracket
base
Spacers
Step 3: Attaching the Base Plate
to the zūmo Mount
1. Thread the M4 pan head screws through
the washers, the cradle, the spacers, and
the base plate.
2. Tighten the nuts to secure the base plate.
Cradle
Washers
Pan head screws
Step 4: Attaching the Base Plate
to the Handlebar Base
1. Align the ball of the handlebar base and
the ball of the base plate with the double‑
socket arm.
2. Tighten the knob slightly.
3. Adjust for better viewing and operation.
4. Tighten the knob to secure the mount.
Getting Started
Base plate
Spacers
Nuts