Changing The Faceplate; Battery Status; Connecting To A Vcr - VTech Kidizoom camera User Manual

CHaNGING THE FaCEPLaTE

1. Gently lift up the lower part of faceplate and remove the faceplate
from the Kidizoom Camera™.
2. Insert the new faceplate by placing the hooks into the holes as
illustrated on the right.
3. Press the lower part of the faceplate against the camera to secure it in place.
TO BEGIN USING KIDIZOOM
CaMERa™
• Press the ON/OFF Button
directly into camera mode and you can start taking photos.
• To switch to other activities, press the Mode Button
From the Main Menu, you can select the following activities: Camera, Movies,
Photo Workshop, Games and System Settings.
• To increase or decrease the volume, press the up or down Volume
Buttons
• To connect to a TV or PC, follow the instructions in
Connecting to a PC below.
• Press the ON/OFF Button again to turn the unit off.

BaTTERY STaTUS

When the screen shows a Low Battery icon
ry of Kidizoom Camera™ by uploading all data to a PC and then change batteries. When the unit shows
the No Batteries icon , the unit will not work properly. New batteries should be inserted before use.
note: To avoid data lost in the internal memory of Kidizoom Camera™, backup the data or change the
batteries when it shows the Low Battery icon
within a few minutes after taking out the old batteries. We recommend that you backup the data in the
internal memory of the Kidizoom Camera™ regularly to avoid data loss, and suggest that you use a SD
memory card (not included) for storage if possible.
aUTOMaTIC SHUT-OFF
To preserve battery life, Kidizoom Camera™ will automatically turn off after 1 - 2 minutes without input.
The camera can be turned on again by pressing the ON/OFF Button.
CONNECTING TO a TV
noTe: Before you connect the Kidizoom Camera™ to a TV, make sure that the unit is working properly
by turning on the camera. Once you have turned the unit on, the LCD will light up and go into camera
mode. If the LCD does not light up, check to see that the batteries are correctly installed.
Connect your Kidizoom Camera™ to a TV or monitor using
the included A/V cable. Insert the A/V cable into the A/V port on your Kidizoom
Camera™. Insert the colored plugs on the A/V cable into the matching color video and
audio input ports on your TV set.

CONNECTING TO a VCR

If there are no video IN or audio IN ports on your TV set, you can connect Kidizoom
Camera™ to a VCR.
• Insert the A/V cable into the A/V port on your
• Connect the yellow plug on the A/V cable to the yellow video input port on your VCR.
• Connect the white plug on the A/V cable to the white audio input port on your VCR.
note: If the A/V cable is plugged into Kidizoom Camera™ while a game is already in progress on the
LCD screen, the game will quit and exit to the main menu. Also, if the A/V cable is unplugged while a game
is in progress on the TV screen, the game will quit and exit to the main menu.
to turn on the camera. After turning on, Kidizoom Camera™ will go
to go to the Main Menu.
Connecting to a TV or
, we recommend to backup all data in the internal memo-
. When changing batteries, insert the new batteries
Kidizoom Camera™.
1
2
3
Main Menu
4