Specifications - Behringer DSP1100 User Manual

9. SPECIFICATIONS

Analog Inputs
Type
Impedance
Nominal Operating Level
Max. Input Level
Analog Outputs
Type
Impedance
Max. Output Level
Bandwidth
THD+N @ 1kHz / +10 dBu
S/N Ratio @ 1 kHz / +10 dBu
Crosstalk @ 1kHz
MIDI Interface
Type
Implementation
Digital Processing
Converters
Sampling Rate
Feedback Destroyer
Type
Filter
Frequency Range
Bandwidth
Attenuation
Time required to
eliminate feedback
Parametric Equalizer
Type
Frequency Range
Bandwidth
Gain
Display
Type
Power Supply
Mains Voltages
Fuse
Power Consumption
Mains Connection
Physical
Dimensions (H * W * D)
Net Weight
Shipping Weight
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be
made from time to time to existing products without prior notice. Specifications and appearance may differ from those listed or
shown.
30
1/4" (6.3 mm) TRS unbalanced
100 kOhms
-10dBV to +4dBu
+16 dBu
1/4" (6.3 mm) TRS unbalanced
100 Ohms
+16 dBu
20 Hz to 20 kHz (+0/-0.5 dB)
0.01 %
98 dB
80 dB
5-Pin-DIN-Socket IN / OUT / THRU
Refer to MIDI Implementation Chart in Chapter 7
20-bit Sigma-Delta, 64/128-times Oversampling
48 kHz
DSP-controlled Digital Signal Analysis
12 independent, digital Notch Filters per channel
20 Hz to 20 kHz, adjustable in steps of 1/60 octave
2/60 to 12/60 octaves, dependent on the characteristic of the feedback
Up to -48 dB, depending on the gain of the feedback
< 0.5 sec, typical at 1 kHz
12 independent filters per channel
20 Hz to 20 kHz, adjustable in steps of 1/60 octave
1/60 to 2 octaves, adjustable in steps of 1/60 octave
+16 to -48 dB in steps of 0.5 dB
2 1/2-digit numeric LED-Display
USA/Canada
U.K./Australia
Europe
General Export Model
100-120 V AC: 125 mA (slow-blow)
200-240 V AC: 63 mA (slow-blow)
10 Watts
Standard IEC receptacle
1 3/4" (44.5 mm) * 19" (482.6 mm) * 7 1/2" (190.5 mm)
2 kg
3.2 kg
9. SPECIFICATIONS
~ 120 V AC, 60 Hz
~ 240 V AC, 50 Hz
~ 230 V AC, 50 Hz
~ 100-120 V AC, ~ 200-240 V AC, 50-60 Hz