Table of Contents
Advertisement
INSTALLATION
1) Unpack the oven and remove the protective packaging containing the turntable (G) and its sup-
port (H). Check that the turntable spindle (D) is fitted correctly into the recess in the centre of the
turntable.
2) Clean the inside of the oven with a soft, damp cloth.
3) Make sure the oven has not been damaged during transport and above all that the door opens
and closes perfectly.
4) Place the appliance on a stable surface at least 85 cm from the ground and out of the reach of
children as the glass door may become extremely hot during
cooking.
30 cm
10 cm
7) Place the turntable support (H) in the centre of the circular housing and rest the turntable (G) on
top. The spindle (D) must be inserted into the housing in
the centre of the turntable.
8) Position the oven in such a way that the power plug and
socket are easily accessible.
9) DO NOT remove the transparent film on the inner surfa-
ce of the door!
10) The majority of modern electronic appliances (TV, radio,
stereo systems etc) are shielded from radio frequency
(RF) signals. Certain electronic appliances may not,
however, be shielded from radio frequency signals deri-
ving from a microwave oven. You should therefore keep
a distance of at least 1 - 2 metres between these applian-
ces and the operating oven.
IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH EC DIRECTIVE
2002/96/EC.
At the end of its working life, the product must not be disposed of as urban waste. It must be taken to a
special local authority differentiated waste collection centre or to a dealer providing this service.
Disposing of a household appliance separately avoids possible negative consequences for the envi-
ronment and health deriving from inappropriate disposal and enables the constituent materials to be
recovered to obtain significant savings in energy and resources. As a reminder of the need to dispo-
se of household appliances separately, the product is marked with a crossed-out wheeled dustbin.
5) When positioning the oven
on the worktop, always
leave a gap of about 10
cm between the oven and
the walls at the back
10 cm
and sides and at
least 30 cm above
the oven (fig. 1).
6) Do not block the air
intake vents. In particu-
lar, never place anything
on top of the oven and
fig. 1
make sure the air and
steam outlet vents (on the
top, bottom and rear of
the
appliance)
ALWAYS FREE (figs. 2
and 3).
air outlet
air outlet
are
air outlet
air
intake
fig. 2
air
intake
fig. 3
29
Advertisement
Table of Contents
