Table of Contents
Advertisement
SECTION 1.0
When installed and operated as described in these instructions, the Eastwood EPA wood stove is suitable
for use as a freestanding wood stove in residential installations. The Eastwood EPA wood stove is not
intended for installation in a bedroom or a mobile home.
In Canada, the CSA B365 Installation Code for Solid Fuel Burning Appliances and Equipment and the CSA
C22.1 Canadian National Electrical Code are to be followed in the absence of local code requirements. In
the USA, the ANSI NFPA 70 National Electrical Code and NFPA 211 Standard for Chimneys, Fireplaces,
Vents and Solid Fuel-Burning Appliances are to be followed in the absence of local code requirements.
In addition to the national installation and/or local building codes, fire officials (or other authorities having
jurisdiction) should be contacted to determine what restrictions and installation requirements might apply
locally.
We recommend that our wood burning hearth products be installed and serviced by professionals who are
certified in the United States by NFI (National Fireplace Institute
Technical Training) or in Quebec by APC (Association des Professionnels du Chauffage).
1.1
GENERAL INSTALLATION
CAUTION:
MIXING OF APPLIANCE
DIMENSIONAL SPECIFICATION OF COMPONENTS MAY RESULT IN HAZARDOUS CONDITIONS
,
CONSIDERED
THE MANUFACTURER SHOULD BE CONSULTED IN THE FIRST INSTANCE
D
O NOT CONNECT THIS UNIT TO ANY AIR DISTRIBUTION SYSTEM
CRACKED AND BROKEN COMPONENTS
.
UNSAFE
A
SOURCE OF FRESH AIR INTO THE ROOM OR SPACE HEATED SHALL BE PROVIDED WHEN REQUIRED
C
ONNECT THE STOVE ONLY TO A LINED MASONRY CHIMNEY CONFORMING TO NATIONAL AND LOCAL BUILDING
CODES FOR USE WITH SOLID FUEL
.
FUEL
This heating unit must serve as a supplementary heat source. An alternative heat source should be
available in the home if needed. The manufacturer cannot be responsible for additional heating costs
associated with the use of an alternative heat source.
It is highly recommended that the user buys this product from a retailer who can provide installation and
maintenance advices.
INSTALLATION
OR FLUE SYSTEM COMPONENTS FROM DIFFERENT SOURCES OR MODIFYING THE
, e.g.
GLASS PANELS OR CERAMIC TILES
,
OR TO A LISTED FACTORY BUILT CHIMNEY SUITABLE FOR USE WITH SOLID
®
) or in Canada by WETT (Wood Energy
.
.
.
,
MAY RENDER THIS INSTALLATION
WHERE SUCH ACTION IS
.
7
Advertisement
Table of Contents
