P Roduct O Verview; Front Panel; Rear Panel - Bose ESP-00 Series II Installation Manual

pro.Bose.com
P o
roduct vervIew

Front Panel

Figure 3. Front Panel View
1. LED Indicators: Power, Status, Ethernet and Serial indication. (See "Front Panel LED Indicators" on page 16. )
2. Channel signal indicators: 32 LED windows for channel status from each installed expansion card.
3. Slot labels: Numbered expansion card location with corresponding signal indicators.

Rear Panel

Figure 4. Rear Panel View
1
1. Top panel: With the removal of eight screws, lid removes to allow installation of expansion cards.
2. Card slot panels: Removable panels, houses up to eight expansion cards.
3. CC-16 connector: Allows Bose CC-16 zone controller connections. (See "CC-16 Connector" on page 18.)
4. GPIO slot 1: Pre-loaded GPIO card which provides eight general purpose control inputs and eight general-purpose control outputs.
(See "Connect GPIO Devices" on page 19.)
5. GPIO slot 2: For optional 2nd GPIO card.
6. Chassis serial number: Location for unit serial number.
7. POWER switch: AC power switch.
8. AC mains receptacle: Power cord connection (IEC 60320-C-14 Inlet).
9. RS-232: 5-wire, RS-232-C (DTE) serial data interface connection. (See "RS-232 Connector" on page 18.)
10. Ethernet connector: RJ-45 jack for network connectivity. (See "Network Connection" on page 20.)
English
1
3
2
Installation and Operating Guide
2
3 4 5
10 9
7
6
8
User Guide Page 15