Cleaning And Maintenance - DeLonghi ICM2 Instructions Manual

ICM2/4 UK 28-04-2003
Electronic models only:
• Press the "ON/AUTO/OFF" switch (fig. 7).The "ON" indicator
light above the switch indicates operation of the filter coffee
maker.
To activate the AUTO mode, press the "ON/AUTO/OFF" but-
ton twice.The "AUTO" indicator light comes on and the appli-
ance will start operating at the time set on the timer.
• The coffee will filter through after a few seconds. It is com-
pletely normal for the appliance to release a little
steam while the coffee is filtering.
• If the "ON/OFF" switch is left in the ON position after filtra-
tion, the warming plate will keep the coffee at the ideal temper-
ature.
Programming start-up (electronic models only)
Check that the current time is set correctly.
To set the time to start preparing the coffee (fig. 8)
• Press the "PROG" button twice: the word "TIMER" appears
on the display;
• Press the "HOUR" and "MIN" buttons repeatedly until reach-
ing the desired start time;
• Press button again.
Keep the buttons pressed to scroll the hours and minutes much
more quickly.
• To return to the current time, press the "PROG" button twice
or wait 10 seconds.
The start-up time is now programmed.
To operate in AUTO mode, prepare the appliance to make the cof-
fee then press the ON/AUTO/OFF button twice until the AUTO
indicator light comes on.

Cleaning and maintenance

Before performing any cleaning or maintenance operations, turn
the machine off, unplug it from the power socket and allow it to
cool down.
1. When cleaning the coffee maker, do not use solvents or abra-
sive detergents. A soft, damp cloth is sufficient.
2. Never immerse the coffee maker in water: it is an electrical
appliance.
14:35 Pagina 5
5
fig. 7
fig. 8
Coffee Maker