What To Do If - AEG Electrolux E47440-6 User Manual

What to do if...

Problem
The cooking zones do not op-
erate
The oven does not heat up
The oven does not heat up
The oven does not heat up
The oven does not heat up
The oven lamp does not operate The oven lamp is defective
The pyrolysis function does not
operate (the time display shows
"C1")
The time display shows "F2"
The time display shows "F2"
The time display shows an error
code which is not in the list
If you can not find a solution to the problem, refer to your dealer or the Service Force
Centre.
WARNING!
Let a qualified electrician or competent person do repairs to the appliance.
If you do not operate the appliance correctly, the visit from the Service Force Centre or
dealer will not be free of charge, even during the warranty period.
Hints for appliances with metal fronts:
If you open the door during or immediately after the baking or roasting procedure, steam
can show on the glass.
Possible cause
Consult the operating instructions for the built-in cooking sur-
face
The oven is not switched on
The clock is not set
The necessary settings are not
set
The fuse in the fuse box is re-
leased
Shelf support rails/oven shelf
runners are not removed
Door is not closed correctly
The door lock is defective
Electronic error
What to do if...
Remedy
Switch on the oven
Set the clock
Control the settings
Control the fuse. If the fuse is
released more than one time,
refer to a qualified electrician.
Replace the oven lamp
Remove shelf support rails /
oven shelf runners
Close the door correctly
Switch the appliance off and on
again through the fuse or the
safety switch in the fuse box. If
the display shows the error
message again, refer to the
Service Force Centre
Switch the appliance off and on
again through the fuse or the
safety switch in the fuse box. If
the display shows the error
message again, refer to the
Service Force Centre
25