Dear customer, Please read these operating instructions carefully and pay particular attention to the safety notes indicated in the first pages. We recommend that you keep this instruction booklet for future reference and pass it on to any future owners. Transport damages When unpacking the appliance, check that it is not damaged.
Warnings The following warnings are provided in the interests of overall safety. You must read them carefully before installing or using the appliance. Installation opening the door. If not, drain the water following the instructions in the instruction book. • All internal packing must be removed before using •...
Disposal Packaging materials The symbol on the product or on its packaging The materials marked with the symbol indicates that this product may not be treated as recyclable. household waste. Instead it shall be handed over to >PE<=polyethylene the applicable collection point for the recycling of >PS<=polystyrene electrical and electronic equipment.
Installation Unpacking 7. Plug all the holes with the plugs which you will find in the envelope containing the instruction booklet. All transit bolts and packing must be removed before using the appliance. You are advised to keep all transit devices so that they can be refitted if the machine ever has to be transported again.
The inlet hose must not be lengthened. If it is too Any extension applied to the drainage hose should short and you do not wish to move the tap, you will not be longer than 200 cm and its diameter must not have to purchase a new, longer hose specially be smaller than that of the original hose.
Your new washing machine This new machine meets all modern requirements for effective treatment of laundry with low water, energy and detergent consumption. • The programme selector dial combines the function of programme and temperature selection, making it easier to set the programme. •...
Control panel EWF 695 1 Detergent dispenser drawer The delay start cannot be selected with “Spin” and “ Drain” programmes. 2 Delay start button 3 Start/Pause button This button makes it possible to delay the starting of After having selected the programme and the required the washing programme by 8 or 4 hours.
Page 9
This option is recommended for normally soiled • Select “Spin” programme. Reduce eventually laundry. the spin speed by means of Spin speed reduction button if washing synthetics, delicates, wool or 6 Spin reduction button garments to be handwashed and then depress the “Start/Pause”...
Maximum loads Washing hints Recommended loads are indicated in the programme charts. Sorting the laundry General rules: Follow the wash code symbols on each garment Cotton, linen: drum full but not too tightly packed; label and the manufacturer’s washing instructions. Synthetics: drum no more than half full;...
Rust: oxalic acid dissolved in hot water or a rust If using concentrated powder or liquid detergents, a removing product used cold. Be careful with rust programme without prewash must be selected. stains which are not recent since the cellulose Pour liquid detergent into the dispenser drawer structure will already have been damaged and the compartment marked...
International wash code symbols These symbols appear on fabric labels, in order to help you choose the best way to treat your laundry. Energetic wash Max. wash Max. wash Max. wash Max. wash temperature temperature temperature temperature 95°C 60°C 40°C 30°C Hand wash Do not...
Operating sequence Before the first wash we recommend that you pour 2 The light “Start/Pause” button starts to flash. litres of water into the main wash compartment of the detergent drawer in order to activate the ECO 5. Select the required options valve.
Page 14
Turn the programme selector dial to “O” and then to 13. At the end of the programme the new programme position. The machine stops automatically. The (End) light Start the new programme by depressing the remain lit and the “Start/Pause” pilot light goes “Start/Pause”...
Programme table WASHING AND SPECIAL PROGRAMMES Consumptions* Temperature/ Programme Additional Wash load Programme Energy Water Duration Programme description functions max. min. 3 rinses with liquid additive, if required For rinsing hand 5 kg 0.05 Short spin at the washed items Rinses max speed For emptying...
Maintenance 1. Bodywork Clean the outside of the machine with soap and water only. Rinse with clean water and dry with a soft cloth. Important: do not use methylated spirits, solvents or similar products to clean the bodywork. 2. Door seal Check from time to time the door seal and eliminate 4.
• Place a bowl on the floor to collect any spillage. • clean the pump if necessary as previously described; • Pull out the emergency emptying hose, place it in the bowl and remove its cap. • replace the emergency emptying hose in its seat •...
Something not working? Problems which you can resolve yourself, before calling the After Sales Service. During machine operation it is possible that the ( End) light starts to flash: 4 flashes= the door has not been closed 2 flashes= the machine does not empty 1 flash= the machine does not fill.
Page 20
Problem Possible cause • The door will not open: • The programme is still running, the drum is turning. • The door lock has not been released. • The water level is above the bottom edge of the door. • The machine is heating the water. •...