Rear Panel - Roland DUO-CAPTURE EX Owner's Manual

Introduction

Rear Panel

7
DC IN jack
7
Accepts connection of the AC adaptor (sold separately).
MEMO
• Even if batteries are installed, the unit will turn off if you connect or disconnect the power cord
from the AC outlet while the unit is turned on, or if you connect or disconnect the AC adaptor
from the unit. You must turn off the power before you connect or disconnect the power cord
or AC adaptor.
• Place the AC adaptor so the side with
the indicator (see illustration) faces
upwards and the side with textual
information faces downwards. The
indicator will light when you plug
the AC adaptor into an AC outlet.
MIDI OUT, IN connectors
8
Connect the MIDI OUT connector to an external MIDI sound module, etc.
Connect the MIDI IN connector to a MIDI keyboard or MIDI controller.
OUTPUT L, R jacks (TRS (balanced) phone type)
9
Output the analog audio signal.
MEMO
The balanced TRS phone type OUTPUT L and OUTPUT
R jacks are wired as shown in the illustration. Make
connections only after first checking the wiring diagrams of
the other equipment you intend to connect.
USB port (
10
Connects to the computer.
NOTE
8
Do not connect the DUO-CAPTURE EX to the computer until the driver has been installed (p. 12).
8 9
)
10 11 12 13
14
GND (SLEEVE)
HOT (TIP)
COLD (RING)