Table of Contents
Advertisement
Slide the appliance into the recess, pushing it
against the wall on the handle side.
Open the door and push the appliance against the
side of the kitchen unit opposite to that of appliance
hinges.
Fasten the appliance with 4 screws provided in the
kit included with the appliance. Snap vent grille (C)
and hinge cover (D) into position.
Apply the sealing strip pushing it between the
refrigerator and the adjacent cabinet.
Apply covers (B) on joint cover lugs and into hinge
holes.
20
A
D015
D
D723
D724
B
D726
C
Advertisement
Table of Contents
