Maintenance And Operation; Maintenance - Chamberlain MIRACLE-ONE Owner's Manual

Elite series vehicular actuator gate operator

Hide thumbs Also See for MIRACLE-ONE:

Instruction manual (49 pages)

Table Of Contents

Table of Contents

To reduce the risk of SEVERE INJURY or DEATH:

1. READ AND FOLLOW ALL INSTRUCTIONS.

2. NEVER let children operate or play with gate controls.

Keep the remote control away from children.

3. ALWAYS keep people and objects away from the gate.

NO ONE SHOULD CROSS THE PATH OF THE MOVING

GATE.

4. Test the gate operator monthly. The gate MUST reverse

on contact with a rigid object or stop when an object

activates the non-contact sensors. After adjusting the

force or the limit of travel, retest the gate operator.

Failure to adjust and retest the gate operator properly

can increase the risk of INJURY or DEATH.

5. Use the emergency release ONLY when the gate is not

moving.

1. Disconnect power before servicing.

2. Severe or high cycle usage will require more frequent maintenance checks.

3. Inspection and service should always be performed anytime a malfunction is observed or suspected.

4. When servicing, please do some "house cleaning" of the operator and the area around the operator. Pick up any debris in the area.

Clean the operator as needed.

5. This linear swing gate operator is designed to be very low in maintenance. For intensive duty installations: (every six months)

lubricate the operator fitting plates, lubricate the gate hinges, and check that electric connections are in good condition.

6. Check external entrapment devices monthly for proper operation.

7. It is suggested that while at the site voltage readings be taken at the operator. Using a Digital Voltmeter, verify that the incoming

voltage to the operator it is within ten percent of the operators rating.