Ul Alarm Connection; Burglar Alarm Connections (House Alarm And Proximity Switch) - Chamberlain MIRACLE-ONE Owner's Manual

This UL alarm is required for UL-325. It will go off after
The UL alarm will sound for a period of
Input Connection. The reset button will shut off an activated audio alarm and reset the operator to function again. See page 32.
Mount alarm on bottom of control box
to protect it from the weather.
B U R G L A R A L A R M C O N N E C T I O N S
House Alarm
The control board provides a relay with a normally open contact to
interface with a house alarm.
When interfacing with a house burglar alarm you must install
positive stops at the gate closed position. See page 28.
U L A L A R M C O N N E C T I O N
5 minutes unless the Stop/Reset button is pressed or a new command is received by the Strike
If the audio alarm goes off, always check the gate area for:
• Obstructions in the gate path.
• Damage to the gate and/or gate operator.
Part # APRS
2 consecutive events on the reverse sensor or UL sensor occur.
(Normally Open) If the gate is forced open without a valid
command, the proximity switch will be activated, causing
the house alarm to activate.
Second ONLY
BRAKE
9
Surge Suppressor
21
Connect the alarm plug
to the J4 "Alarm"
connection on the
control board.
Control Board Relay
See page 15.
0.5 Amp - 125 Vac
Proximity Switch
LIMITS
10 11 12 13 14 15
Connect the alarm plug
to the J4 "Alarm"
connection on the
control board. See
page 15.
Contact Rating
1 Amp - 24 Vdc
16 17 18