Adjustments; Set Gate Opening Direction; Setting The Timer - Chamberlain MIRACLE-ONE Owner's Manual

S E T G A T E O P E N I N G D I R E C T I O N
Inside
Property
Gate Opens Inward
The timer works the same on the single or master/second
control board.
NOTE: If a secondary safety sensor device is NOT used when
the timer is ON, the gate WILL hit a vehicle obstructing the
gate path during the close cycle.

Adjustments

CAUTION
To reduce the risk of SERIOUS INJURY or DEATH:
Disconnect power BEFORE performing ANY adjustments.
S E T T I N G T I M E R
Inside Property
The opening direction works the same on
the single or master/second control board.
To use the automatic close for the gate system, the
timer should be switched to the
To use the push close command, the timer should
be switched to the
26
Gate Opens Outward
"ON" position.
Set Timer 3 to 60 seconds.
"OFF" position.