Brother NC-series User Manual page 91

USER'S GUIDE
Note
If the PCPrint option is not installed, PCPrint will not appear on this
screen. You must have PCPrint installed in order to use an Brother print
server.
13. When you get the Destination Attributes screen, enter the StreetTalk
name of the Brother print server (from step A-3) and an optional
description. Press F10.
14. You will get the Output strings menu. This screen allows you to
define strings of characters that can be sent before and after the print
job to put the printer in a particular state (for example, duplex mode).
The default values will work OK for most applications. However, if
you are printing text files directly from the DOS prompt, you should
define a Post-job string such as \f (formfeed) to insure that the paper
is ejected (this is generally not needed with DOS or Windows
application programs, since the program or drivers reset the printer
after each job, and it may cause problems with binary graphics files).
Press F10 to accept the output string values.
15. You will then get the Enable strings menu. This menu allows you to
select whether or not a banner page is printed, whether or not to use
the setup and reset strings, and other options. Choose the desired
options or press F10 to select the defaults.
16.You will be asked, "Would you like to add another destination at this
time?" Select No.
17. You will then get the Print Queue Status screen, which will show
that the queue is not accepting jobs or printing jobs. Change both
values to Yes and then press F10. You will get the message that the
queue is now ready to accept and print jobs. Press F10 again.
18. If you are configuring more than one queue on the file server, repeat
steps 1 through 17 of this section. Otherwise, press ESCAPE multiple
times to exit the MANAGE utility.
9-4