Auto Mode Operation; Temperature Adjustment During Auto; Fan Speed - Mitsubishi Heavy Industries SRK20ZJ-S User Manual

AUTO mode operation

Automatically selects the operation mode (COOL, HEAT, DRY) depending on the room temperature when switched on.
Display in OFF status
• The current time and preset OPERA-
TION MODE are displayed while the
air conditioner is turned off.

Temperature adjustment during AUTO

Air temperature adjustment is possible even during automatic operation. There are 6 levels of adjustment possible with the
During automatic operation, 24ºC is preset both for heating and cooling.

FAN SPEED

You can choose the capacity of your air-conditioner
when heating mode, cooling mode or fan mode.
Operation capacity by your choice
Set automatically by microcomputer
Powerful operation with high capacity
Standard operation
Energy-saving operation
When the unit is not in AUTO mode:
1
Point the remote control toward the air-conditioner, and
2
NOTE
• In case air is not blowing out during
the operation.
Page 20
• When the included clean filter is in-
stalled the air conditioner will clean
the air during automatic operation.
When a change in temperature is required.
1
When it is a little cold
Press the
Each time the
–6 → –5 → ............ –1 → ±0 → +1 ............ +6.
When +6 is indicated, even if the
When it is a little hot
Press the
Each time the
+6 → +5 → ............ +1 → ±0 → –1 ............ –6.
When –6 is indicated, even if the
Setting
temp.(ºC)
FAN SPEED
AUTO
HI
MED
LO
– 8 –
Press MODE button.
Move the [ mark] to the (Auto) position.
Press the ON/OFF button.
To stop: Press the ON/OFF button.
AUTO mode can be
operated by simply
pressing the ON/OFF
button.
• If you do not want the AUTO mode program, change to
COOL, HEAT, DRY or FAN instead of AUTO.
• Airflow direction adjustment procedure.
Press the or button.
button.
button is pressed, the switch over occurs in the following order
button is pressed, the indicator does not change.
button.
button is pressed, the switch over occurs in the following order
button is pressed, the indicator does not change.
Remote Control display
-6 -5 -4 -3 -2 -1
18 19 20 21 22 23
Press the FAN SPEED button.
Move the [ mark] to the preferred fan speed position.
AUTO HI MED
NOTE
• When changing FAN SPEED from HI to LO, the sound of
refrigerant flowing may be heard.
Page 9
Page 10
button or the button.
+ 0
+1 +2 +3 +4 +5
24 25 26 27 28 29
LO
+6
30