To Place A Call On Exclusive Hold - NEC Dterm Series I User Manual

To retrieve:
Lift handset or press
Press held line. Use handset to converse.
NOTE: Any station with this line appearance can retrieve the call.
If unanswered
After preprogrammed time, Automatic Recall is initiated.
Visual and audible signal (rapid flash and ring burst) is sent to station that
placed call on hold.
NOTE: Hold shows as a flashing green LED on your phone.
The same line on other phones shows as a flashing red LED.
Recall shows as a flashing green LED on your phone and
flashing red LED on other phones with the same line.

TO PLACE A CALL ON EXCLUSIVE HOLD

Press Hold twice. Line appearance indicates
interrupted wink.
NOTE: If held line appears on other Dterm
stations, LED remains steadily lit red.
Speaker.
- 23 -