Call Park (System) - NEC Dterm Series I User Manual

2000 presses
NOTE: Station 2000 can alternate between the two
parties by pressing

CALL PARK (SYSTEM)

To Park a Call From Terminal With LCD:
While connected to a station or trunk, press
and dial the Call Park access code, or press
Park key. Display shows HLD= (part location number nn=00-19).
To park a call from terminal without LCD:
While call in progress, press
or press CALL
Dial Call Park location number (00-19) and receive service set tone. (If park
location is busy, dial the next location number.)
Restore handset.
To retrieve a parked call:
Dial Call Park local retrieval code and parked call location number (00-19).
Station user is connected to parked call.
Answer button and converses with station 2001.
Answer button.
Transfer
PARK.
- 29 -
Transfer
Call
and dial the Call Park access code,