Cleaning The Main Unit; Cleaning The Magnetic Card Reader (Option); Cleaning The Printer - Fujitsu 7000 F-Series User Manual

4.1.1 Cleaning the main unit

Wipe the surface with a soft cloth such as gauze that has been moistened with neutral detergent.
The red rectangles in following illustrations show the ventilation holes in the front and back of
the F-Series models. These holes must be kept clean and remain unobstructed in order to
prevent excessive internal temperatures.

4.1.2 Cleaning the magnetic card reader (option)

The read head of the magnetic card reader can become severely soiled with use. If you continue
to use a magnetic card reader with a dirty read head, the reader may fail to read data correctly.
Clean the read head at regular intervals (about once every two months).
Use a cleaning card to clean the head. Using the same procedure as that for reading a magnetic
card, slide the cleaning card through the reader four to five times for each side. Note that the
magnetic card reader is optional.

4.1.3 Cleaning the printer

Clean the printer at regular intervals (roughly about once every six months). If not kept clean,
paper debris and dust are likely to accumulate, which may degrade the print quality and/or
cause paper jams.
To clean the printer, remove the printer head cover (see "Cleaning the print head and roller").
and remove any debris in the printer.
THIS DOCUMENT CONTAINS CONFIDENTIAL INFORMATION, IS PROVIDED FOR FUJITSU CUSTOMER USE ONLY,
AND IS NOT TO BE SHARED WITH ANY THIRD PARTY WITHOUT FUJITSU'S PRIOR WRITTEN CONSENT.
Chapter 4 - Daily Maintenance
30 - Cleaning the Equipment
Caution:
When cleaning, never spray any liquids directly onto the unit.
Always spray onto a cleaning cloth and then wipe to clean.
NOTE: Use of the Fujitsu cleaning card (Product number D99L-1001-0060)
is recommended.
Do not touch the print head immediately after printing. Allow it to cool before
attempting to clean it.
TeamPoS7000_User Guide (F-Series)_D900000477.pdf
TeamPoS
7000 User Guide