Using The Ct11 Printer - Fujitsu 7000 F-Series User Manual

3.5 Using the CT11 Printer

This section describes the names and functions of the thermal printer components and explains
how to open and close the printer cover and load the paper roll. The procedure for loading and
removing the paper roll varies depending on whether the paper is being used. Load and remove
the receipt paper roll by following the appropriate procedures.
Please refer to the printer documentation for the other printers supported by the
TeamPoS 7000.
• The names and the functions of each component of the printer unit are described below.
(2) Print head
(3) Power LED
(4) Paper LED
(5) Error LED
Legend
1
2
3
4
5
6
THIS DOCUMENT CONTAINS CONFIDENTIAL INFORMATION, IS PROVIDED FOR FUJITSU CUSTOMER USE ONLY,
AND IS NOT TO BE SHARED WITH ANY THIRD PARTY WITHOUT FUJITSU'S PRIOR WRITTEN CONSENT.
TeamPoS7000_User Guide (F-Series)_D900000477.pdf
Revision 1.0 - June 1, 2012
(6) Feed button
Top cover Open this cover to replace the paper roll.
Print head Does the printing.
Power LED Lights blue when power is applied.
Paper LED Lights amber when paper level is low or empty.
Error LED Lights red when the top cover is open or when the roll is near the
end. Blinks when an error has occurred.
Feed button Press this switch when inserting or advancing the receipt paper roll.
(1) Top cover
Chapter 3 - Basic Operations
Using the CT11 Printer - 23