MS-9642 Mainboard
Soft-Off by PWR-BTTN N
This feature allows users to configure the power button function. Settings are:
[Instant-Off]
[Delay 4 Sec.] When you press the power button, the computer enters the
USB KB Wake-Up from S3
This setting allows you to enter "Any Key" (max. 8 numbers) to wake up the
system from S3 state.
Resume By Alarm
When [Enabled], your can set the date and time at which the RTC (real-time
clock) alarm awakens the system from suspend mode.
Date (of Month) Alarm
When Resume By Alarm is set to [Enabled], the field specifies the month
for Resume By Alarm.
Time (hh:mm:ss) Alarm
You can choose what hour, minute and second the system will boot up.
PWRON After PWR-Fail
This item specifies whether your system will reboot after a power failure or
interrupt occurs. Available settings are:
[Off]
[On]
[Former-sts]
3-16
The power button functions as a normal power-on/-off button.
suspend/sleep mode, but if the button is pressed for more
than four seconds, the computer is turned off.
Leaves the computer in the power off state.
Leaves the computer in the power on state.
Restores the system to the status before power fail-
ure or interrupt occurred.