Receiving A Message; Sending An Emergency Alert E; (Conventional And Ltr Modes Only) - Motorola HT1250-LS+ User Manual

y or z to locate the desired message in
4
the preprogrammed list.
–or–
when using the enhanced keypad microphone
only, enter the number of the message you
wish to send.
–or–
if programmed by your dealer (see page 18),
press the button that has been
preprogrammed for a specific message.
Note: You cannot re-transmit the current
message update.
5 Press the PTT button.
Msg In Prog
You see
Note: If the radio is not able to send the
message or the radio does not
receive an acknowledgement if an
one is expected,
No Acknowledge
you see
If the radio is
not able to send the message and
no acknowledgement is expected,
you see
No Channel

RECEIVING A MESSAGE

When your radio receives a message:
• You hear two alert tones.
• The yellow LED indicator flashes.
• The display alternately
Msg Received
shows
and the preprogrammed alias.
Note: If you receive a message that is not
programmed into your radio, the display
alternately shows the
following:
Message #_
No Alias

SENDING AN EMERGENCY ALERT E

(CONVENTIONAL AND LTR MODES ONLY)

In the event of an emergency, you may need to
quickly get the attention of others for help. The
Emergency Alert feature, if programmed by
your dealer, causes your radio to send a
priority Emergency Alert (see page 18) to a
specific radio or dispatch center.
The display shows E when your radio is in the
Emergency Alert state.
57
English