Pc Health Status - Abit KN8 ULTRA User Manual

3.8 PC Health Status

Phoenix – AwardBIOS CMOS Setup Utility
FAN Fail Alarm Selectable
Shutdown when FAN Fail
CPU FanEQ Speed Control
- CPU FAN Active Temperature
Shutdown Temperature
CPU Warning Temperature
CPU Temperature
System Temperature
CPU FAN Speed
NB FAN Speed
SYS FAN Speed
CPU Core Voltage
DDR Voltage
ATX +3.3V
ATX +5V
ATX +12V
CK804 CORE Voltage
Hyper Transport Voltage
+3V Dual
↑↓:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values
FAN Fail Alarm Selectable:
This item selects the fan that will be monitored for malfunction.
Shutdown When Fan Fail:
The system will be shut down if the selected fan is not running.
CPU FanEQ Speed Control:
This item allows you to control the CPU fan speed down to a specific percentage.
When set to a specific percentage, the CPU fan speed will run at the percentage you set in this
item if the temperature limit set in the item "Active Temperature" is not exceeded.
The CPU fan speed will run at 100% regardless of what the percentage you set in this item if
the temperature limit set in the item "Active Temperature" is exceeded.
- CPU FAN Active Temperature:
This item sets the temperature limit that would activate the function of "CPU FanEQ Speed
Control" option.
Shutdown Temperature:
You can set the processor shutdown temperature here. If the processor temperature exceeds
the settings value, system will force to shutdown to protect the processor not overheat.
KN8 Ultra-SOTES, KN8 Ultra, KN8
PC Health Status
Disabled
Disabled
Disabled
70
Disabled
Disabled
O O
48 C/118
O O
42 C/107
3125 RPM
4963 RPM
0 RPM
1.52 V
2.67 V
3.31 V
5.08 V
11.97 V
1.56 V
1.23 V
2.27 V
F6: Fail-Safe Defaults
F
F
F7: Optimized Defaults
Item Help
3-23